Gardner Denver RBS 15, Service Manual And Parts List

Page: 28 / 62

5.2.4 Sizes from 165 to 225
Insert the compensating spring Pos. 63
Insert the sealing spacers 25 completed with the sealing piston rings as indicated at paragraph 5.4.
Insert the oil splash disks 23A and 23C onto the shaft
Mount the bearings 31 and 32 as indicated at paragraph 5.5.1 and 5.5.2.
Lock the bearing 31 with the nut 27A and relevant washer
Insert the spacer 56 and the lubricating disk 16A onto the driven shaft
Lock the assembly by means the nut 27 and relevant washer
Insert the shaft sleeve Pos. 37 as indicated in figure 26
Pipe
Shaft sleeve 37 Disk 16A
Nut 27
Nut 27A Bearing 32
Bearing 31
Spacer 24
Fig. 26
Compensating springs 63 Compensating springs 63
Mount the drive side oil sump 12A with a new gasket 50
WARNING: Use the hoisting devices suitable to the weight of the oil sump (table 7.1).
Fix the oil sump with the screws Pos. 90
size De Di
165-175 130 105
205-225 150 125