Gardner Denver RBS 15, Service Manual And Parts List

Page: 39 / 62

Tightening procedure of the nuts 26
Screw the injector or the oil pump to the shaft end using eventually the suitable connecting screws, for the
devices see table 7.5, for the connection screws see table 7.6.
Inject oil and screw alternatively the nut 26 until the gear wheel has been tightened to the spacer 22.
The tightening torque Ms of the nuts 26 is indicated in the table 7.6
WARNING: The oil pressure during assembly of the wheels may reach 2200 bar and the
incorrect assembly of the injector or of the oil pump may cause serious physical injury owing
to jets of oil under pressure
Oil injector
Nut 26 Nut 26
Wheel 11B Wheel 11A
Spacer 22
Fig. 45
Release the pressure and drain the oil for at least 1 minute
disassemble the injector or the oil pump