![background image](http://html1.mh-extra.com/html/gardner-denver/l110-10a-v4/l110-10a-v4_translation-of-the-original-operating-instructions_563811014.webp)
NOTE
All danger signs must be complete and legible.
Check regularly and replace if necessary.
2.7
Transport and positioning
Transport
A suitable forklift with forks of adequate length
must be used to transport the compressor. De-
pendent on type, the compressor weighs up to
2,800 kg.
Only insert the forks at the intended load support
points.
The compressor must not be transported using a
crane, even when still in its packaging.
No person may remain in the danger area during
transport. In particular, do not encroach into the
area under the raised compressor or place your
feet beneath it.
Positioning / installation location
The entire surface of the compressor must be
placed on an even suitable substrate.
The installation location (compressor room) must
be dimensioned so that there is sufficient access
to the compressor and the necessary cooling is
ensured.
No inflammable or explosive materials may be
stored in the vicinity of the compressor.
2.8
Normal operation
The compressor may only be operated in a techni-
cally fault-free condition for its intended use, with
an awareness of safety and hazards while observ-
ing the operating instructions.
Only operate the compressor if all protective and
safety equipment, sound insulation, ventilation and
extraction equipment and the cooling water supply
(water-cooled compressors only) are present and
serviceable.
Check regularly that:
All hoses and pipelines are serviceable and
firmly attached.
There are no leaks (oil, coolant or cooling wa-
ter).
The electrical power cables are free from faults.
The cooling water supply is guaranteed (wa-
ter-cooled compressors only).
Rules for working with compressed air:
Forbid all working practices that could pose a
risk to safety
Never 'play around' with compressed air.
Never direct compressed air onto the skin or at
other people.
Never use compressed air for cleaning cloth-
ing.
When using compressed air to clean equip-
ment, proceed with great care and always use
eye protection.
Safety measures
Only operate the compressor with the enclosure
closed.
At least once per shift check the compressor for
externally visible damage and defects. Immedi-
ately report changes that have occurred (includ-
ing in the operating behaviour) to the responsi-
ble post/person. If necessary stop the compressor
immediately and secure. Immediately rectify any
faults.
Do not switch off or remove extraction and ventila-
tion equipment when the compressor is running.
Remote control
If a remote control is available, a sign with the fol-
lowing lettering must be clearly visible on the com-
pressor: "Attention! The compressor is remotely
controlled and could start without warning!"
In addition safety precautions must be imple-
mented so that nobody works on the compressor
when it is under remote control.
2.9
Special tasks
Organisational
Adhere to the prescribed maintenance work and
intervals including details about the replacement
of parts/part assemblies contained in the operating
instructions.
Maintenance and repair work must only be carried
out under the supervision of or by a person quali-
fied to carry out this work.
If necessary, cordon off a wide area around the
workplace.
Workshop equipment appropriate for the task is
essential for carrying out maintenance and repair
work.
Summary of Contents for L110 10A V4
Page 73: ......