Important Information
4
112037
1
Important Information
1.1
General information
The
biovac 106 Aspiration Systems
conforms to the:
2006 / 42 / EC
Machinery Directive
20
1
4 /
30
/ E
U
Electromagnetic Compatibility Directive
The CE sign is located on the rating plate. Observe the binding national and local regulations
when fitting the system into installations.
Our products are sold worldwide and can therefore be equipped with the typical national
plugs and for the various voltages. You will find more information about the available pump
designs on our web page in the internet.
1.2
Target groups
This Operating Manual is intended for the personnel planning, operating and maintaining the
biovac aspiration systems. This group of people includes:
Designers and fitters of vacuum apparatus,
Employees working on commercial laboratory and industrial vacuum technology applica-
tions and
Service personnel for biovac aspiration systems.
The operating and maintaining personnel of the biovac aspiration systems must have the
technical competence required to perform the work that has to be done.
The user must authorize the operating personnel to do the work that has to be done.
The personnel must have read and understood the complete Operating Manual before using
the biovac aspiration systems.
The Operating Manual must be kept at the place of use and be available to the personnel
when required.
1.3
Intended Use
The layout of the biovac aspiration systems must be appropriate for the conditions of use.
The user bears the sole responsibility for this.
The biovac aspiration systems may only be operated under the conditions stated
–
in the "Technical Data" section,
–
on the rating plate, and
–
in the technical specification for the order concerned.
The biovac aspiration systems have an integrated, highly chemical-resistant diaphragm
pump. It is used in chemical and biological applications to extract non-explosive liquid
residues safely and precisely.
1.4
Use for an Unauthorized Purpose
It is forbidden to use the pump for applications deviating from the technical data stated on
the type plate or the conditions stated in the supply contract, or to operate it with missing or
defective protective devices.