13-18-603 Page 32
Please refer to the dryer manual 13-18-602 for all installation, operation and maintenance instructions.
DAILY CHECK
- Refer to Section 14, page 111
“Maintenance Schedule”.
STOPPING THE UNIT
- Press
“STOP-RESET” button. The oil reservoir will automatically blow down, as
the main motor is de-energized. If the unit is a water-cooled heat exchanger type, close any manual
water inlet valves after unit has stopped. Be sure external heat is turned on if below 40
°
F (5
°
C),
Automatic restarting or electrical shock can cause injury or death. Disconnect,
lockout and tagout the unit from the power supply and any other circuits before
servicing unit.
When the pressure relief valve opens, a stream of high velocity air is released,
resulting in a high noise level and possible discharge of accumulated dirt or
other debris. Always wear eye and ear protection and stand clear of the
discharge port when testing the pressure relief valve to prevent injury.
Never paint, lubricate or alter a pressure relief valve. Do not plug vent or
restrict discharge.
Operation of the unit with improper pressure relief valve setting can result in
severe personal injury or machine damage. Ensure properly set valves are
installed and maintained.
C
C
C
A
A
A
U
U
U
T
TT
I
II
O
O
O
N
N
N
Summary of Contents for AirSmart VS25A
