34
AFTER SALES SUPPORT
1300 855 831
MODEL: MFH3300-4P PRODUCT CODE: 47629 02/2017
AUS
Storage/Transport/Disposal and recycling/Troubleshooting
MFH3300-4P
3
Leave the engine to cool (approx. 5 minutes).
4
Remove the spark plug (see section 10 Change and clean the spark plug).
5
Add one teaspoon of 2-stroke engine oil into the combustion chamber. Slowly
pull the starter cord several times to apply a layer of oil to all internal compo-
nents. Fit the spark plug again.
Note: Store the equipment in a dry place and far away from possible ignition
sources such as an oven, a gas fired hot water boiler, a gas fired dryer, etc.
Putting the equipment back into operation
1
Remove the spark plug (see section 10 Change and clean the spark plug).
2
Quickly tug on the starter cord to remove excess oil from the combustion cham-
ber.
3
Clean the spark plug and check that the electrode gap is correct, or insert a
new spark plug with the correct electrode gap.
4
Prepare the equipment for operation.
5
Fill the tank with the relevant mixture of petrol and oil. See the section "Petrol
and oil".
XIV. TRANSPORT
To transport the machine, empty the petrol tank.
Draining fuel (Fig. 36).
• Hold a collection container beneath the fuel drain bolt.
• Unscrew the tank cap and remove it.
• Allow the fuel to run out completely.
• Screw the tank cap on firmly by hand.
Clean coarse dirt off the equipment with a brush or hand brush.
XV. DISPOSAL AND RECYCLING
The equipment is supplied in packaging to prevent it from being damaged in transit.
The raw materials in this packaging can be reused or recycled. The equipment and
its accessories are made of various types of material, such as metal and plastic.
Never place defective equipment in your household refuse. The equipment should
be taken to a suitable collection center for proper disposal. If you do not know the
whereabouts of such a collection point, you should ask in your local council offices.
XVI. TROUBLESHOOTING
The table below contains a list of fault symptoms and explains what you can do to
remedy the problem if your equipment fails to work properly. If the problem still per-
sists after working through the list, please contact your nearest service workshop.
