AFTER SALES SUPPORT
15
1300 855 831
MODEL: MFH3300-4P PRODUCT CODE: 47629 02/2017
AUS
MFH3300-4P
Safety regulations
son to person. The following factors can have an influence on this phenomenon:
Circulatory disorders in the hands of the operator, low outdoor temperatures,
long hours of operation. Therefore, it is recommended to wear warm protective
gloves, and to take breaks at regular intervals.
•
The exhaust of internal combustion engines is poisonous and can lead to
breathing difficulties or even suffocation. Do not operate the tool inside or in
poorly ventilated work areas.
•
Refill the petrol tank only outdoors, or in well-ventilated areas.
•
Petrol and petrol vapours are highly flammable. Keep away from flammable
materials and sources of ignition.
•
Do not smoke while refueling or operating the tool.
•
Immediately wipe away spilled petrol.
•
Start the motor only at a location far away from the place of refuelling.
•
Always make sure that the engine fuel cap is well closed before starting. Look
out for possible fuel leakage.
•
When the engine is running or the engine is hot, do not open the cap of the fuel
tank. Only refill the fuel tank when the engine is fully switched off and has been
allowed to cool.
•
Open the cap of the fuel tank slowly so that petrol vapour can escape.
•
Make sure the handles are dry, clean and free of petrol mixed with oil.
•
Do not use the tool without the exhaust pipe and ensure exhaust pipe guard is
correctly installed.
•
Do not touch the exhaust pipe, there is a risk of burns.
•
Only use the fuel as recommended in the manual. Keep petrol only in contain-
ers designed petrol storage and store it at a safe location.
•
While cutting on a slope, always stand below the cutting tool.
•
Make sure no objects or other debris are collected in the trimmer head, in the
protective hood, or in the engine before starting
•
Always switch off the tool before you put it down.
•
Do not use any wire, or anything similar in the line spool.
•
Only use the recommend nylon line in the trimmer head. Do not use any wire.
•
Only work during daylight, or when the area is illuminated well.
•
Subject the tool to a visual inspection before each use.
•
Check, if all screws and connecting parts are tightened.
•
Always use both hands to hold the tool.
•
Check the tool, and its components and guards for damages, or wear and tear
before each use and have it repaired if necessary. Do not override any of the
safety devices on the machine. Do not use the tool when damages or signs of
wear become apparent.
•
Keep the tools clean and fully functional to ensure better and safer work.
•
Always maintain a safe distance between the tool and your body during work.
•
Always switch off the tool when work will be interrupted or you change your
working location. When changing location wait until the cutting tools have com-
