28
AFTER SALES SUPPORT
1300 855 831
MODEL: MFH3300-4P PRODUCT CODE: 47629 02/2017
AUS
Maintenance
MFH3300-4P
m
IMPORTANT!
•
Always pull out the spark boot plug each time before carrying out any cleaning.
•
Never immerse the equipment in water or other liquids in order to clean it.
•
Store the petrol multi garden tool in a safe and dry place out of the reach of chil-
dren.
XI. MAINTENANCE
m
INJURY WARNING!
Always wear protective gloves when working on or around
cutting tools.
Before performing any maintenance or cleaning work, always turn off the engine and
pull out the spark boot plug.
1.
Do not spray the unit with water. It damages the engine.
2.
Clean the unit with a cloth, hand brush, etc.
3.
Use a moist piece of cloth to clean the plastic parts. Do not use any cleaning
agents, solvents, or sharp objects.
4.
During the course of work, wet grass and weed wraps around the drive shaft be-
low the cutting guard for technical reasons. Remove this, otherwise the engine will
overheat because of too much friction.
Regular checks
Keep in mind that following specifications relate to normal usage. Owing to circum
-
stances (longer periods of daily work, severe dust exposure, etc.), the specified
intervals will become correspondingly shorter.
•
Before start of work and after refueling
Check if cutting tools are seated securely, general view inspection, sharpen cut-
ting blade (also, if necessary).
•
Weekly inspection:
Lubrication of gear (also, if necessary).
•
If necessary:
Retighten accessible fastening screws and nuts. You will avoid excessive wear
and tear and damages of the tool, when you follow the instructions in this manual.
The user is responsible for all damages caused by non-compliance with instructions
in this manual. This also applies to non-authorised modifications of the tool, use of
non-authorised spare parts, accessories, working tools, unrelated and not intended
use, secondary damages due to use of faulty components.
Wear Parts
Even when used in the intended way, some components are subject to normal wear.
They have to be replaced depending on the kind of duration of usage. These parts
include, among others, the cutting tool and the retaining disk.
