18
AFTER SALES SUPPORT
1300 855 831
MODEL: MFH3300-4P PRODUCT CODE: 47629 02/2017
AUS
Safety regulations/Before starting the equipment
MFH3300-4P
m
WARNING!
Keep passers-by away from running equipment but never
work by yourself.
•
Keep within earshot of others in case you need help.
•
Stop the engine immediately when someone approaches you.
•
Make sure that the saw chain does not come in contact with foreign objects
such as stones, fences, nails and similar. These objects could be ejected and
injure the operator or passers-by or damage the saw chain.
•
Do not use the machine within 10 metres of a position from which it can reach
high-voltage cables.
Before working on the tool itself (e.g. transport, set-up, retooling, cleaning
and maintenance), disconnect the spark plug cap!
VI. BEFORE STARTING THE EQUIPMENT
Each time before use, check the following:
•
That there are no leaks in the petrol system.
•
That the equipment is in perfect condition and that the safety devices and cut-
ting devices are complete.
•
That all screws are securely fastened.
•
That all moving parts move smoothly.
1
Fuel and oil
Recommended petrols
Use only a mixture of unleaded non-ethanol petrol and 2-stroke engine oil. Mix
the fuel mixture as indicated in the fuel mixing table. 40:1. 40 parts unleaded pet-
rol to 1 part 2-stroke engine oil
m
IMPORTANT!
Do only use unleaded non-ethanol petrol.
m
IMPORTANT!
Do not use a fuel mixture which has been stored for longer than
90 days.
m
IMPORTANT!
Never use 2-stroke oil with a recommended mixing ratio of
100:1. The manufacturer’s warranty will be voided in case of engine damage due
to inadequate lubrication.
m
IMPORTANT!
Only use containers designed and approved for the purpose to
transport and store fuel.
Pour the correct quantities of petrol and 2-stroke oil into the mixing bottle (see
scale printed on the bottle). Replace the mixing bottle cap securely, then shake to
mix the fuel well.
