![background image](http://html1.mh-extra.com/html/gardenia/wlbc520/wlbc520_owners-manual_3506259039.webp)
39
Note that failing to do so could cause the muffler to become overheated, and that
this in turn could cause the brush cutter to overheat.
GEAR CASE
Supply multi-purpose grease at every 25 hours of
use. Remove the cutter holders to arrange for old
grease to exit. (F14)
IDLE ADJUSTMENT SCREW(F15)
This is the screw to adjust the engine rotation
when the throttle lever is set to the lowest speed
position. I you turn right (clockwise) rotation
increase, and left (counterclockwise) decreases. In
case the blade continues to rotate or engine stops
when you return the throttle lever completely to the
original position, make readjustment.
(1) Idle adjustment screw
(2) High
(3) Low
MAINTENANCE BEFORE STORAGE