19
When the lights are pulsed, the display shows that a trigger has occurred as
follows.
PP600 is ready
PP600 shows that a trigger has
been received for one of the
channels and the delay period is
running.
A trigger input occurs
Pulse is complete
Delay period is complete
PP600 shows that one of the
channels is being pulsed.
PP600 is ready
9.3.8
Extended Set Up
Extended Set Up allows all the features of the PP600 to be set up. It is entered
by holding the RANGE button down for one second.
In order for the whole range of timing values to be entered, it is necessary to
specify whether the delay is in seconds or milliseconds. This is done by
selecting an exponent of “0” (for seconds) or “–3” for milliseconds. The same
applies for setting currents. See the diagrams below for how this works.
Continuous output is set up as follows. Extended setup allows the current to be
set up in steps of 0.25mA, where as Simple Set Up only allows 1mA steps.
