166
GAP Diagnostic 2019-07-15 All Rights Reserved
User Manual : Version 33, Firmware V3.0
IIDTool
BT G2
and regular
Figure 103.
BT
and regular, updating the IIDTool with a BAS file,
3. Select “Custom”
4. Click on “Program Firmware” and wait until completion.
5.
As instructed by the updater software upon completion, proceed with automated file
loading/update on your mobile devices.
See
6. On first connection to the vehicle following the update of the tool, the contact must be turned
on (ON) without starting the engine and the last connection of the tool. The IIDTool conducts a
scan to determine which ECUs are present on the communication bus.
IIDTool
Pro
and
BT G3
or
BT G2
and regular
(
BT G2
and regular
currently fitted with a custom
firmware and a second (or third...) file as been made available)
:
Figure 104.
Pro
,
BT
, updating the IIDTool with an additional BAS file,
3. Click on “Program Flash File Only” and wait until the update is completed.
Step 4: In the vehicle
Simply navigate to IIDTool Menu->
ECU Flash and select the correct file. Make sure to follow the
general re-flashing precautions.
BT
and regular IIDTool:
Revert back the IIDTool firmware to the latest
release version once re-flashing is completed.
Summary of Contents for IIDTool Pro
Page 190: ...190 IIDTool Appendix...
