Gap Diagnostic IIDTool Pro, User Manual

Page: 43 / 194

42 43
IIDT
ool
GAP Diagnostic 2019-07-15 All Rights Reserved
User Manual : Version 33, Firmware V3.0
2.6 Synchronizing the Mobile Application ( BT/ Pro )
Purpose
Refresh files in the Mobile Application IIDControl to achieve consistency with the firmware of the newly
updated tool (
section 2.5
) or prior to first usage.
Note: Performing synchronization immediately after updating the tool or before first usage will prevent
prolong file loading when connected to the vehicle due to a poor internet connection.
Prerequisites
• Having access to a PC or Mac personal computer or a USB power source.
• Own a compatible mobile device (
section 1.7.5
) connected on the internet.
• The IIDControl App is installed and up-to-date (
section 2.4
)
• The IIDTool firmware was updated (
section 2.5
) or a new mobile device is used with the tool for
the first time.
Steps
1- If the tool has been updated with the “GAP IIDTool Updater” version 3.9 or less, disconnect the
IIDTool BT / Pro from the USB port. Otherwise, leave it connected and go to step 3.
2- Connect the IIDTool BT / Pro on the USB port.
2- Launch the mobile Application IIDControl in the mobile device.
3- Click on “ Search for tool ”.
4- Select the tool in “ Bootloader ”. For the first synchronization, fill the required fields.
5- Wait while all data files are downloaded : the word “ Loaded ” indicates completion.
6- Exit the application by pressing “Disconnect”.
7- Repeat previous steps for each mobile devices that may be used with the tool.
8- Unplug the IIDTool from the computer or USB supply.