132
GAP Diagnostic 2019-07-15 All Rights Reserved
User Manual : Version 33, Firmware V3.0
4.8 Function “ Live Values ” (LV)
4.8.1 Definition
This function allows viewing of current values or status of a sensor or actuator. For a complete list of
available values for your vehicle, please consult the list of features on the
Access
1- Perform the initial stages of access (
)
2- Select “Live Values” function
3- Navigate through the ECU using commands
4- Select the desired ECU
5- Consult
for live value selecting and viewing.
WARNING
The driver should never observe a live value while driving. For
safety reasons, only the passenger should read a live value
while the vehicle is on the move.
Before viewing live values, please read the following notes.
Notes:
•
It is normal to see warning light(s) turning on when viewing live values.
•
When broadcasting live values, some ECUs will stop sending messages on the networks. As a
result, other ECUs will interpret this as a communication error. While not mandatory, we strongly
suggest performing a clear fault of all ECUs after viewing live values. If you have faults currently
stored that you would like to note, perform a read fault prior to viewing live values and clearing.
•
II
L322-02
While viewing a live value, selecting another will require the Speed + / Menu Up and
Speed - / Menu Down buttons to be pressed a little longer than usual.
•
II
Only the name of the live value will first be displayed and scrolled if necessary. After a few
seconds, the value or status will appear on the right with its associated unit in the metric system.
4.8.2
II
Viewing live values when using the integrated interface
To allow viewing of live values by the
passenger
, the value selected prior to driving the vehicle will
stay displayed while the vehicle is on the move. For safety reasons, the IIDTool will not respond to any
commands from the cruise control buttons while on the move. When the vehicle comes to a halt, the
cruise control commands will become operative and navigation can resume.
Summary of Contents for IIDTool Pro
Page 190: ...190 IIDTool Appendix...
