104
GAP Diagnostic 2019-07-15 All Rights Reserved
User Manual : Version 33, Firmware V3.0
4.6.4 Anti-lock Braking System (ABS)
Yaw Rate Sensor Calibration
(ABS, L319-10, L320-10, L322-10)
This routine is used when a new ABS ECU or yaw sensor is fitted. The yaw sensor measures a vehi
-
cle’s angular velocity around its vertical axis.
4.6.5 Transfer Case
(L319, L320, L322-06, L322-10, L405, L494)
Clutch Calibration
This routine will calibrate the transfer case clutch.
Preparations
• Turn engine OFF
• Select neutral, depress and hold brake pedal
• Start the routine and follow the instructions on screen
Usages
This function is used when:
• The switch is replaced
• The transfer box ECU is replaced or re-flashed
• The range position sensor is replaced
• The transfer box motor is replaced
• The transfer box is replaced or repaired
Position or Range Sensor Calibration
This routine will allow the TCCM ECU to learn the sensors characteristics.
Preparations
• Turn engine OFF
• Select neutral, depress and hold brake pedal
• Start the routine and follow the instructions on screen
Usages
This function is used when:
• The transfer box ECU is replaced or re-flashed
• The range position sensor is replaced
• The transfer box is replaced or repaired
Notes:
Both calibrations should be performed outside since starting the engine is required at one point.
It is normal for warning lights to turn ON and error messages to be displayed during these calibrations.
XY Sensor Calibration (gear position sensor, manual transaxles only)
This routine will calibrate the XY sensor positioned on the transmission.
Summary of Contents for IIDTool Pro
Page 190: ...190 IIDTool Appendix...
