manualshive.com logo in svg

Ganz ZR-DHC830NP, Instruction Manual

Share
Download
Ganz ZR-DHC830NP Instruction Manual Download Page 7

Do not install the system in an area featuring high 
magnetic, electric wave or wireless devices such 
as radio or TV.

• Install the system in a place without magnetic 
objects, electric frequencies or vibration. 

Install the system in a place with appropriate 
moisture and temperature levels.

• Avoid installing the system at high (over 40

℃

) 

or low (under 0

℃

) temperatures. 

Prevent any substances from entering into the 
system.

• This may cause system malfunction. 

Do not place any heavy objects on the system. 

• This may cause system 

malfunction

.

Install the system in a place with sufficient air 
ventilation. 

• Keep at least 15cm distance between the back 
of the system and the wall, and at least 5cm 
distance between the side of the system and any 
walls.

Install the system on a stable and level surface. 

• The system may not operate properly. 

Caution

Warning

Power setup

Connect with AC115V if the 
AC selector appears as shown 
here.

Connect with AC230V if the 

AC selector appears as 

shown here.

Summary of Contents for ZR-DHC830NP




























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands