Ganz ZR-DHC830NP Instruction Manual Download Page 101

Page: 101 / 123

101

4.7 Backup

Backup display

1. Click on the

“Backup”

button to backup in search mode.

2. Click on the

“Backup”

button to access the backup display.

2 Range

: Set the backup time.

1 Backup format

: Select the recording format for backup.

This is used to backup still images in BMP or JPEG format.

This is used to backup video data with the player included for
playback.

This is used to backup video data in one of the standard MS
Windows Media Player formats.

This function is used to backup video data in GANZ video
format, GANZ viewer software is required for playback.

• AVI backup

• BMP, JPEG backup

• SFX backup

(Self Extract file)

• Time backup

Camera

: Select the camera or channel to backup. Only one channel can be selected for AVI

and SFX formats.

Summary of Contents for ZR-DHC830NP




























































































































Search results

Summary of Contents for ZR-DHC830NP

Reviews:

Related manuals for ZR-DHC830NP

Brands by name

Popular brands

Ganz ZR-DHC830NP, Instruction Manual

Search results

Summary of Contents for ZR-DHC830NP

Reviews:

Related manuals for ZR-DHC830NP

Brands by name

Popular brands