manualshive.com logo in svg

Ganz ZR-DHC830NP, Instruction Manual

Share
Download
Ganz ZR-DHC830NP Instruction Manual Download Page 36

36

36

2.12 Pan/tilt mode

2.12 Pan/tilt mode

Direction button : 

8-way control for PTZ direction.

Focus/Zoom/Iris

: Controls the PTZ focus, zoom and iris.

2

1

The pan/tilt controls are not displayed on the live display screen until a camera set up for pan/tilt control has 
been selected for full screen. The controls are then displayed on the right-hand side of the screen as seen 
below. 

2

6

7

1

“Auto Pan”

: Click on the button to enable AutoPan and click again to disable.

“Start”

: Button to set up the PTZ start position.

“End”

: Button to  set up the PTZ end position.

3 Auto Pan

: Automatically observes along two previously defined points.

8

3

4

5

4 Setting

: Click “Setting” button to setup to Auto Focus and Iris Mode. Also PTZ movement can be 

set between 10 different speed levels.

5 Set Tour

: Click “Set Tour” button to setup a PTZ camera to move between preset positions in a 

selected order and time interval.

[Note]

•Controlling on Auto Focus or Auto Iris can change to passive mode.

☞

☞

Summary of Contents for ZR-DHC830NP




























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands