9
CAMERA FUNCTION SETTING
The following 8 functions can be set and reset.
Note
Be sure to set the mode switch (for AGC, backlight compensation, ATW, and flickering-reduction operation
settings) to the "(MENU)" position. Failure to do this makes it impossible to set the "shutter speed/flickering-
free operation," "backlight compensation," "AGC/sensitivity levels," and "white balance" from the camera
menu. An iris level, chroma level, image quality (enhancement), and camera ID title can be set from the
camera menu regardless of the mode switch setting.
Functions
(1) Iris level
Adjusts the lens iris.
(2) Shutter speed/flickering-reduction operation
Sets the shutter speed to Normal (1/50), 1/120 (flickering-reduction), 1/125, 1/250, 1/500, 1/1000, 1/2000,
1/4000, 1/10000 or AES.
(3) Backlight compensation
Prevents an object from becoming too dark and the back ground from becoming too white to be viewed due to
backlight.
(4) Automatic gain control (AGC)/sensitivity levels
An AGC level can be automatically maintained constant, automatically changed or set for OFF. Also, a
sensitivity level can be changed in increments of OFF, 2 times, 4 times, 6 times, 8 times, 10 times, 16 times,
24 times or 32 times.
(5) White balance
Four modes are made available for selection: ATW, AWB, MANUAL 1 and MANUAL 2.
ATW:
The camera's white balance varies as an object's color temperature varies.
AWB:
The camera operates on the initially-set white balance even if an object's color
temperature changes, once the camera white balance is adjusted when the
camera is installed.
MANUAL 1 and MANUAL 2: Select either mode to adjust the white balance so that the color looks natural
when an object is viewed under a special light source.
(6) Chroma level
You can adjust the chroma level as you like.
(7) Image quality (enhancement)
You can enhance the contours of an image as you like.
(8) Camera ID title
Up to 8 alphanumeric characters and symbols can be used to set a camera ID title. You can select the ID title
display position from "Lower Right," "Lower Left," "Upper Left," and "Upper Right" of the screen.
Reset
The camera functions can be reset to the factory-preset values (initial setting status). Refer to p. 11.
