Installation Guide
44
2) Fix the Mini Pendent Mount on the wall with proper screws and screw anchors.
3) Attach the Waterproof Rubber to the Mini Pendent Mount.
4) Run the cable(s) through the Mini Pendent Mount with the Data Cable’s 22-pin
cable coming out of the outlet.
NOTE: Please block the cable entry hole with the supplied sponge to
avoid insects entering the Pendent Mount. The sponge can be placed in
two ways as shown in the illustrations below.
5) Thread the cable(s) through the Outdoor Mount Kit and join the Outdoor Mount
Kit to the Mini Pendent Mount with the supplied screws and washers. Then adjust
the Waterproof Rubber to the joint.
6) Connect the cable(s) to the PTZ Camera.
7) Join the PTZ Camera to the Outdoor Mount Kit with the supplied M5 screw and
washers.
Mounting Plate
Cable Entry Board
Sponge
Sponge
Summary of Contents for ZC-PT236
Page 1: ......
Page 78: ...Installation Guide 77...
