Installation Guide
47
Outdoor PTZ Camera:
Items Needed
•
PTZ Camera
•
Outdoor Mount Kit (supplied)
•
Data Cable (supplied)
•
Standard Pendent Mount and equipped items (optional accessory)
•
Waterproof Rubber (supplied)
•
M5 Standard/Security Screw (supplied)
•
Screws and Screw Anchors for fixing the Standard Pendent Mount onto the
ceiling (not supplied)
Tools Needed
•
Tool for drilling
•
Tool for screwing
Follow the steps below to mount the Dome Camera with the Standard Pendent
Mount.
1) Make a cable entry hole on the wall to recess the cables. Otherwise, users could
push up the cable entry board on the Standard Pendent Mount’s mounting plate
to place the cables (see the illustration in section 4.4.1 Mini Pendent Mount >
Step 1).
2) Fix the Standard Pendent Mount on the wall with proper screws and screw
anchors.
3) Attach the Waterproof Rubber to the Standard Pendent Mount.
4) Run the cable(s) through the Standard Pendent Mount with the Data Cable’s
22-pin cable coming out of the outlet.
NOTE: Please block the cable entry hole with the supplied sponge to
avoid insects entering the Pendent Mount. See the illustrations in section
4.4.1 Mini Pendent Mount > Step 4.
5) Thread the cable(s) through the Outdoor Mount Kit and join the Outdoor Mount
Kit to the Standard Pendent Mount with the supplied screws and washers. Then
adjust the Waterproof Rubber to the joint.
6) Connect the cable(s) to the PTZ Camera.
7) Join the PTZ Camera to the Outdoor Mount Kit with the supplied M5 screw and
washers.
Summary of Contents for ZC-PT236
Page 1: ......
Page 78: ...Installation Guide 77...