Installation Guide
46
2) Fix the Standard Pendent Mount on the wall with proper screws and screw
anchors.
3) Attach the Waterproof Rubber to the Standard Pendent Mount.
4) Run the cable(s) through the Standard Pendent Mount with the Data Cable’s
22-pin cable coming out of the outlet.
NOTE: Please block the cable entry hole with the supplied sponge to
avoid insects entering the Pendent Mount. See the illustrations in section
4.4.1 Mini Pendent Mount > Step 4.
5) Thread the cable(s) through the Indoor Mount Kit and join the Indoor Mount Kit to
the Standard Pendent Mount with the supplied screws and washers. Then adjust
the Waterproof Rubber to the joint.
6) Connect the cable(s) to the PTZ Camera.
7) Join the PTZ Camera to the Indoor Mount Kit with the supplied screw and
washers.
Wall Mounting: Standard Pendent Mount + Indoor Mount Kit
Summary of Contents for ZC-PT236
Page 1: ......
Page 78: ...Installation Guide 77...
