![background image](http://html1.mh-extra.com/html/gantner/q-brixx-a101/q-brixx-a101_quick-start-manual_560952013.webp)
Q.uick Start Guide
Q.brixx
13
Gantner Instruments Inc.
USA | China | Singapore | India | Austria | Germany | France | Sweden
1550 Hotel Circle N ∙ Suite 180 ∙ San Diego CA ∙ 92108 ∙ T +1 888 ∙ 512 ∙ 5788
[email protected]
www.gantner-instruments.com
Terminating Resistance ON: PIN 9 and 10 Up
Terminating Resistance OFF: PIN 9 and 10 Down
4.
The 4-pin switch is used to set the UART setting.
UART 1: PIN 1 and 2 Up (PIN 3 and 4 Down)
UART 2: PIN 3 and 4 Up (PIN 1 and 2 Down)
5.
“Newer” version has 1 x 8-pin dip switch and 1 x 6-pin dip switch.
6.
The 8-pin switch is used to set the address (binary).
7.
The 6-pin switch is used to set the UART and terminating resistance settings.
UART 1: PIN 1 and 2 Up (PIN 3 and 4 Down)
UART 2: PIN 3 and 4 Up (PIN 1 and 2 Down)