![background image](http://html1.mh-extra.com/html/gantner/q-brixx-a101/q-brixx-a101_quick-start-manual_560952054.webp)
Q.uick Start Guide
Q.brixx
54
Gantner Instruments Inc.
USA | China | Singapore | India | Austria | Germany | France | Sweden
1550 Hotel Circle N ∙ Suite 180 ∙ San Diego CA ∙ 92108 ∙ T +1 888 ∙ 512 ∙ 5788
[email protected]
www.gantner-instruments.com
There are 2 x columns, the input value and the Engin. value. There are 2 x points
for each column, a low end and high end. The input value represents the
physical characteristic that the sensor is measuring (i.e. Volts). The Engin. value
represents the measured quantity that we wish to save (i.e. LBs).
For this example, a ±10V input could represent ±500 LBs:
Click OK to confirm the setting changes.
Calibrating channels using live values:
The Field Length sets the maximum number of digits the sensor will display.
The Precision sets the number of decimal places.
The Field Length needs to be at least 2+ the Precision.
Zeroing and Taring are also configured in this section. A separate quick start
guide that discusses how to apply the zero and tare feature can be found on
the
Gantner Instruments website:
10.
Range/Error: this column sets the minimum and maximum value to display. A
value not within this range will result in an error/sensor failure. The behavior at