![background image](http://html1.mh-extra.com/html/gantner/q-brixx-a101/q-brixx-a101_quick-start-manual_560952024.webp)
Q.uick Start Guide
Q.brixx
24
Gantner Instruments Inc.
USA | China | Singapore | India | Austria | Germany | France | Sweden
1550 Hotel Circle N ∙ Suite 180 ∙ San Diego CA ∙ 92108 ∙ T +1 888 ∙ 512 ∙ 5788
[email protected]
www.gantner-instruments.com
8.
After every module has been secured, the complete system is ready to be
configured. If a module needs to be replaced or swapped, simply remove the 2
x long hex screws, slide the module out of the slot and insert the new module.
PC CONFIGURATION
There are two main settings that need to be configured on the PC to allow
communications with a Gantner Instruments test controller.
1.
Firewall – Provide exceptions for Gantner Instruments software tools
2.
IP Address Configuration – If the Gantner system and PC are connected to the
same network via a switch or router, the Gantner controller will obtain an IP
address automatically using DHCP. If the Gantner controller and PC are
connected without using a switch (direct Ethernet port to Ethernet port), the PC
needs to have a static IP address on the same network as the Gantner
controller.