![background image](http://html1.mh-extra.com/html/gantner/gat-net-lock-7000/gat-net-lock-7000_installation-configuration-and-operation_3408443018.webp)
GAT NET.Lock 7000 System
Mounting
18
HB_GAT-NETLOCK7000--EN_30
www.gantner.com
3.6 Mounting in Lockers with Metallic Doors
In lockers with metallic doors the GAT NET.Lock 7000 is mounted on the left or right inner locker wall (depending if it
is a right or left locker). In the door 2 cut-outs have to be made - one on the inside door sheet and one on the outside
door sheet. The two parts of the GAT NET.Lock Bolt Set 7200 are then mounted into the locker door. See the following
figure and the steps afterwards for the mounting instructions.
1. GAT NET.Lock 7000
2. GAT NET.Lock BoltSet 7200
3. Mounting screws for the GAT NET.Lock 7000
4. Door shackle
5. Door contact
6. Mounting screws for bolt set (pan-head metal Torx Ø 3.5 x 9.5 mm)
7. LED position
8. Cut-out for GAT NET.Lock BoltSet 7200
9. Cut-out for label carrier
10. Label carrier
Figure 3.7
- Mounting of the GAT NET.Lock 7000 in a locker with metallic doors (right door)