![background image](http://html1.mh-extra.com/html/gantner/gat-net-lock-7000/gat-net-lock-7000_installation-configuration-and-operation_3408443026.webp)
GAT NET.Lock 7000 System
Electrical Connection
26
HB_GAT-NETLOCK7000--EN_30
www.gantner.com
Observe the following values for the number of connectable controllers per interface:
- A maximum of 8 slave controllers per RS 485 line
- Maximum of one RS 485 line length = 200 m
Figure 4.5
- Maximal RS 485 line length
It is important to differentiate between the RS 485 IN and OUT plugs. Connect the incoming cable (from the master
Controller or the previous slave controller) to the RS 485 IN plug and the outgoing cable (to a next slave controller)
with the RS 485 OUT plug. This is particularly important if the power supply is to be forwarded to the following slave
controllers (please refer to the next section).
Figure 4.6
- RS 485 IN and OUT direction on the GAT NET.Controller S 7000