GAT NET.Lock 7000 System
Electrical Connection
30
HB_GAT-NETLOCK7000--EN_30
www.gantner.com
4.4.3 Connection of the Power Supply
The GAT NET.Controller M 7000 is connected via an external power supply unit to the mains power supply, i.e.
depending on the type of unit and the country of use U
AC
230 V or U
AC
115 V (please refer to technical data). The
power supply is connected to the controller via the MOLEX plug.
Figure 4.13
- Power supply on the GAT NET.Controller M 7000
The power supply unit may be placed in the storage space inside the master controller.
4.4.4 LED Signals and Buttons
For the display of the operating state and to start certain functions various LED indicators and buttons are provided
on the GAT NET.Controller M 7000.
Figure 4.14
- LEDs and buttons provided on the GAT NET.Controller M 7000
LEDs
- RS 485 IN (yellow): The connection with the slave controller has been established.
- RS 485 IN (green): RS 485 communication is active.
- LED 1 (blue):
Reserved for future functions.
- LED 2 (green/red): See "5.5. Status Information at GAT NET.Controller S 7000 and GAT NET.Controller M 7000".
Buttons
- RESET:
1. See "5.3. Restart a Controller GAT NET.Controller S 7000 or GAT NET.Controller M 7000"
2. See "5.4. Delete Configuration Parameters of a Controller (= Reset to Default Settings) "
- MODE:
Reserved for future functions.
Yellow LED
Green LED