GAT NET.Lock 7000 System
General Information
12
HB_GAT-NETLOCK7000--EN_30
www.gantner.com
FID (Company ID) and Site Key:
LEGIC systems use the FID number. In MIFARE systems the site key is used, which is a combination of the FID and
the read and write keys. The FID and site keys are unique numbers for every leisure facility installation. These num-
bers are encoded in every data carrier and every device and with this number it can be guaranteed that data carriers
of one installation are not used in other installations.
Slave Controller:
A slave controller GAT NET.Controller S 7000 is a device where the locks GAT NET.Lock 7000 get connected to (up
to 24 locks per slave controller). The slave controller receives control signals via the serial RS 485 network and
operates the connected electronic locks accordingly.
Master Controller:
A master controller GAT NET.Controller M 7000 is used to connect the slave controllers via Ethernet to a higher-
ranking PC/server with control software (e.g. GAT Relaxx).
Booster:
Electronic component for amplifying the RFID reading field of the GAT NET.Lock 7000. A booster is often used to
extend the RIFD reading range of the GAT NET.Lock 7000, e.g. at metallic or thick doors or small data carriers. The
bolt sets for the GAT NET.Lock 7000 already include boosters - 1 in the GAT NET.Lock BoltSet 7100 for non-metallic
doors and 2 in the GAT NET.Lock BoltSet 7200 for metallic doors.
GAT Relaxx:
PC software which is installed on a server/host computer and which is used to configure and control the connected
controllers and locks. A separate installation manual and integrated help is available for this software.
User / Visitor:
The terms "user" and "visitor" are used for the persons, which use the lockers and the GAT NET.Lock 7000.
2.5 RFID Technology
Identification of the users at the GAT NET.Lock 7000 is done via RFID (radio-frequency identification) with 13.56
MHz. There are three different technologies. A letter/letters are added to the designations of the GANTNER products
to mark the technology which the device supports:
-
"B":
LEGIC
®
-
"F":
MIFARE
TM
-
"ISO":
ISO 15693
The GAT NET.Lock 7000 and the master controller GAT NET.Controller M 7000 can work with all of these technolo-
gies. The slave controller is available in two different versions, depending on the type of RFID technology:
- GAT NET.Controller S 7000 B:
LEGIC
®
- GAT NET.Controller S 7000 F/ISO: MIFARE
TM
and ISO 15693
Therefore it is necessary that all devices and data carriers in a facility are of the same technology. The information in
this manual is written in general for all RFID types. If there is special information only valid for a certain technology it
will be noted.