Installation
G&D VisionXS-F-DP-UHR ·
10
English
Establishing a connection to the user module
Transmission 1|Tx:
Insert the LC plug of a fibre optic cable, which is available as
accessory, into this interface. Connect the other end to the
Transmission|Rx
interface
of the user module or to one of the
Dynamic Ports
of a compatible matrix (see page 5).
Transmission 1|Rx:
Insert the LC plug of a fibre optic cable, which is available as
accessory, into this interface. Connect the other end to the
Transmission|Tx
interface
of the user module or to one of the
Dynamic Ports
of a compatible matrix (see page 5).
IMPORTANT:
The devices use components with laser technology which comply
with laser class 1.
Never stare directly into the beam when wearing optical instruments!
NOTE:
Remove the protection caps from the
Transmission
interfaces and from the
cable plug.
NOTE:
The activation of the
Transm. Redundancy feature
activates the
Transmission 2
interface.
To use the
Transmission 2
interface, you need an additional SFP transceiver.
Choose the right
SFP transceiver
for your variant of the
VisionXS-F-DP-UHR
series.
The
Transm. Redundancy modules
contain both, a corresponding
SFP transceiver
and
the
Transm. Redundancy feature
.
Use the
Transmission 2
interface to establish a connection with a second counter-
part.
Transmission 1
Service
Pwr Main Power
Transmission 2
Red. Power
Network
Service
Pwr Main Power
Transmission 2
Red. Power
Network
Summary of Contents for VISIONXS-F-DP-UHR Series
