G&D VISIONXS-F-DP-UHR Series, Installation & Operation Manual

Page: 90 / 164

The VisionXS-F-DP-UHR series
5 · G&D VisionXS-F-DP-UHR
The VisionXS-F-DP-UHR series
KVM extenders of the VisionXS-F-DP-UHR series consist of a computer module and a
user modules.
Connect the computer to be operated to the computer module ( VisionXS-CPU ). The
remote console is connected to the user module ( VisionXS-CON ).
Both the computer module and the user module are connected using two optical
fibres.
Signals of keyboard, mouse and DisplayPort™ video of the computer connected are
transmitted using these fibres and enable you to operate the computer remotely.
Optional connection to a KVM matrix switch
As an alternative to using the devices as stand-alone units, you can also connect the
computer modules ( CPU ) and the user modules ( CON ) of the VisionXS-F-DP-UHR series
to compatible G&D KVM matrix switches.
Use the CPU modules to connect computers and the CON modules to connect work-
stations to the matrix switch.
The above-mentioned variants are compatible with the following matrix switches:

ControlCenter-Compact-Serie: Version 1.6.0 or later

ControlCenter-Digital-Serie: Version 2.5.0 or later