G&D VISIONXS-F-DP-UHR Series, Installation & Operation Manual

Page: 107 / 164

Configuration
G&D VisionXS-F-DP-UHR · 22
English
The basic operation of the on-screen display (see page 22) and the web application
Config Panel (see page 25) is described on the following pages.
Operating the on-screen display at the console
The on-screen display (OSD) – just like the web application Config Panel , which is
described on the following – can be used to change the configuration of the KVM
extender.
The on-screen display can be opened by pressing a configured hotkey at the user
module.
Showing the on-screen display at the console
How to open the on-screen display:
1. Press Ctrl+Num ( default ) to open the on-screen display.
Function Default setting Page
Resetting the default settings 53
Resetting the netfilter rules 54
Changing the colour of the information display light green 55
Information display temporarily 56
Adjusting the transparency of the on-screen display average transparency 57
Automatic closing of the OSD after inactivity deactivated 58
Changing the position of the information dispaly left upper corner 59
Changing the position of the on-screen display centre 60
NOTE:
Use the remote hotkey ( default : Ctrl + Num ) at the console to open and configure
the remote OSD of the computer module and the local hotkey ( default : Alt + Num ) to
open and configure the local OSD of the user module.
During the starting process of the user module, the settings of both hotkeys are
shown (see Starting process on page 16).
NOTE: In the default settings, English is selected as the language for the on-screen
display. To switch to a different language, press F10 and select the desired lan-
guage. English is assumed to be selected in the following chapters.