Installation
6
· G&D DVIVision
Installing the computer module (DVIVision-CPU)
The computer, whose signals are transmitted to the remote console, is connected to
the computer module. A local console can optionally be connected to the computer
module.
Connecting the computer
DVI CPU:
Connect the digital video output of the computer to this interface. For this
purpose, use the
DVI-D-M/M-2
cable.
USB CPU:
Connect the USB interface of the computer to this interface. For this pur-
pose, use the
USB-AM/BM-2
cable.
Keyb. CPU:
Connect the PS/2 keyboard interface of the computer to this interface.
For this purpose, use the
PS/2-M/M-2
cable (purple plugs).
Mouse CPU:
Connect the PS/2 mouse interface of the computer to this interface. For
this purpose, use the
PS/2-M/M-2
cable (green plugs).
Additional interfaces of the variants DVIVision
-AR
and
-ARU:
Line Out:
Connect the Line-In interface of the computer to this interface. For this
purpose, use the
Audio-M/M-2
cable.
Line In:
Connect the Line-Out interface of the computer to this interface. For this
purpose, use the
Audio-M/M-2
cable.
RS232:
Connect the nine-pole serial interface of the computer to this interface. For
this purpose, use the
RS232-M/F-2
cable.
Figure 1: Interfaces to connect the computer to the computer module
The mouse and keyboard signals of both consoles can
either
be transmitted to the
computer through the USB interface
USB CPU
or through the PS/2 interfaces
Mouse CPU
and
Keyb. CPU.
