Safety guidelines
G&D DVIVision ·
1
Safety guidelines
Please read the following safety guidelines attentively before you start running the
G&D product. The guidelines help to avoid damage to the product and prevent pos-
sible violations.
Inform all persons that use this equipment in detail about these safety guidelines.
Observe all warnings or operating instructions put on the device or stated in this
operating guide.
,
Avoid the risk of electric shock
To avoid the risk of electric shock, do not open the device or remove the covers.
If service is required, please contact our technicians.
,
Disconnect the main power plug or the power supply before installation
Before installation, ensure that the device has been disconnected from the power
source. Disconnect the main power plug or the power supply of the device.
,
Ensure constant access to the power plugs
Ensure during the installation of the devices that the power plugs remain accessible.
!
Do not cover the ventilation openings
Ventilation openings prevent the device from overheating. Do not cover them.
!
Ensure proper installation position
For reasons of electric safety, the device has to be installed upright and horizontally.
!
Avoid the risk of tripping over cables
Ensure that there is no risk of tripping over cables.
!
Only use a grounded electrical outlet
Operate this device by using a grounded electrical outlet.
!
Use only the provided G&D power pack
Operate this device with the provided G&D power pack or with the power packs
listed in the operating manual.
!
Operate the device only in the intended area of application
This device has been designed for indoor use. Do not expose it to extreme cold,
heat or humidity.
