Guntermann & Drunck GmbH
Operating Instructions
CATVision (MC)
page 27
each other and the picture is faultless. If another colour signal appears to early
on the monitor repeat this procedure as described before.
After having defined the delay compensation confirm and safe your entry with
F1
or reject your choice with
ESC
. In both cases the
IVT
window will be closed.
Note:
It isn´t useful to compensate all three colors, since the delay is a result of all
three colors. Compensating all three colors would only shift all colors together
to a new inncorrect value. Therefore adjust only two colours to compensate the
run time delay.
If you want to make further changes within the
IVT
window move to the next
entry with
cursor up/cursor down
.
5.4.5
Copy the IVT Settings
The settings for a video channel can be copied to other video channels with
F3
.
It may be useful if the conditions for all video channels are the same.
5.4.6
Tested Resolutions
In-house the following resolutions reached good pictures (the values are
dependent on the used cable and the
IVT
settings):
Cable length (m)
Resolution
Refresh Rate
200
1920 x 1440
max. 75 Hz
300
1280 x 1024
max. 85 Hz
This overview includes
no maximum values
.
5.4.7
Recommended Cables
G&D recommends for the use of the
CATVision system
the following cables:
Patch cable:
D
AETWYLER
UNINET 7702 flex 4P AWG26 S-STP
(up to 100 meter)
Installation cable:
Kerpen MegaLine G12-150 S/F AWG22 (up to 300 meter)
Summary of Contents for CATVision
