G&D CATVision, Installation And Operation Manual

Page: 82 / 152

Guntermann & Drunck GmbH Operating Instructions
CATVision (MC)
3 Installation
The installation of CATVision and CATVision-MC differs in the number of
connectable video sources. As an installation example the manual focus is
therefore on the CATVision . The connection of additional video sources will be
explained separately.
3.1 Installing of the transmitting unit
Alternative: connection for keyboard/mouse
via USB-AM/BM-2 to the PC
Connection for
the CAT-x cable
to the CATVision-CON
Keyb PS/2.
Mouse PS/2
Monitor
CPU
Line In Line Out RS 232
VGA Keyb. Mouse CPU
Trans
USB K/M
CPU
USB 1.1
Transmission 12V DC/0,6A
Red. Power
10
0-24
0V
/6
0-5
0Hz
14
0-
82m
A
Connection for the CPU-x cable
to the local PC; VGA, PS/2,
keyboard and PS/2 mouse
Port of the keyboard
for the local console
Port for the monitor
of the local console
Mouse port
for local console
 Disconnect monitor, keyboard and mouse from the computer.
 Monitor:
Connect the 15 pole Sub HD connector of the
CPU-x cable
(x = 2, 4,
6 or 9 m) to the VGA interface of the computer.
 Keyboard/Mouse (PS/2):
Establish a connection to the keyboard and mouse interface of the
computer by means of the two PS/2 connectors of the CPU-x cable.
Both connectors have corresponding symbols.
Alternativ
 Keyboard/Mouse (USB)
Establish a connection to the keyboard and mouse interface of the
computer by means of the two USB connectors of the
USB-
AM/BM-2-cable
page 8