G&D CATVision, Installation And Operation Manual

Page: 100 / 152

Guntermann & Drunck GmbH Operating Instructions
CATVision (MC)
5.4.4.3.3 Fine Tuning
Fine tuning: 36
The following keys are available to you for fine tuning:
Key 
Subtracts 1 from the fine tuning value
Key 
Adds 1 to the fine tuning value
Keys CTRL + 
Subtracts
5
from the fine tuning value
Keys CTRL + 
Adds 5 to the fine tuning value
Home Minimum fine tuning (value: 0)
End Maximum fine tuning (value: 575)
If you want to make other changes within the IVT submenu, use the UP
ARROW and/or DOWN ARROW keys to move to another entry.
After establishing the fine tuning setting, confirm and save your selection by
pressing
F2
or discard your changes by pressing
ESC
. In both cases, the
IVT
submenu is closed and you return to the FUNCTION menu.
5.4.4.3.4 Setting the Run Time Delay Compensation
delay R delay G delay B
0 ns 0 ns
page 26
0 ns
At the CATVision system the run time delay compensation can be set up to 46
ns.
At 0 ns there is no delay compensation.
For compensating the delay the following keys can be used:

minimizes the delay compensation for 2 ns.

increases the delay compensation for 2 ns.
CTRL + 
minimizes the delay compensation for 10 ns.
CTRL + 
increases the delay compensation for 10 ns.
Example:
If the colour signal red appears too early (red shadow appear left of the letter)
move to the entry
delay R
and delay this signal until all colours are on top of