
Page 11 of 28
Gamma Vacuum DIGITEL MPCq Users Manual
Document 900034, Rev B
11.11 Serial Port Setup
Figure 14. Serial Port Setup Screen
Available setup:
Node Address - Configures unit node address (1-255). Gamma
protocol command packet structure requires node address.
Serial Standard - Selects serial standard: RS-232, RS-485HD (two
wire mode), and RS-485FD(four wire mode)).
Baud Rate - Selects baud rate (9600, 19200, 38400, 57600,
115200).
Data bits/Stop bits - Information only.
Serial Protocol - Selects serial protocol running on the serial port.
Supported protocols are Gamma, Modbus
ASCII, and Modbus RTU.
NOTE:
Modbus register map is available on Gamma Vacuum
website under download section.
11.12 Profibus Setup
Figure 15. Profibus Setup Screen
For Profibus information reference Profibus user manual, document
900033 available on Gamma Vacuum website under download
section.
11.13 Ethernet Interface Setup
Figure 16. Ethernet Setup Screen
Avalable setup:
MAC address - Information only. Ethernet MAC address. Cannot be
changed.
DHCP - Selects DHCP client on/off.
IP address - Configures Ethernet IP address.
Subnet Mask - Configures Ethernet subnet mask address.
Gateway address - Configures Ethernet gateway address.
Link state - Information only.
Supported Protocols:
Gamma Protocol (Running on TCP port 23)
Modbus TCP Protocol (Running on TCP port 502)
NOTE:
Modbus register map is available on Gamma Vacuum
website under download section.