6
Clamp Head Installation
The post of the string clamp head and the tube of the
string clamp base are treated with grease to provide
protection against corrosion during shipping. Remove
any excessive grease with a clean cloth prior to use. The
post and tube may also be cleaned with isopropyl
alcohol. After this type of thorough cleaning, the post
and tube should be treated with a light coating of
machine oil to protect the surfaces against corrosion and
to ensure smooth operation.
Installing the Racquet Mounting System
Align the threaded hole in the bottom of the frame
support post with the slot in the turntable. Screw the lever
lock bolt with washer into the center hole located in the
bottom of the support post and loosely tighten. Position
the washer with the rounded edge toward the turntable.
Repeat procedure for the support post on the opposite
side of the turntable.
There are two guide pins located in the bottom of the
support post. The outer guide pin may be removed if
needed to provide additional separation space between
the mounting arms for mounting super oversize racquets.
Assembly Instructions
