7.5.
Serial port setup
Figure 12. Serial port setup screen
Node Address - Configures unit node address (1-255). Gamma protocol
command packet structure requires node address.
Serial Standard - Selects serial standard: RS-232, RS-485HD (two wire mode),
and RS-485FD (four wire mode).
Baud Rate - Selects baud rate (9600, 19200, 38400, 57600, 115200).
Data bits/Stop bits - Information only.
Serial Protocol - Selects serial protocol running on the serial port.
Supported protocol is Gamma protocol.
7.6.
Ethernet interface setup
Figure 13. Ethernet setup screen
MAC address - Information only. Ethernet MAC address. Cannot be changed.
DHCP - Selects DHCP client on/off.
IP address - Configures Ethernet IP address.
Subnet Mask - Configures Ethernet subnet mask address.
Gateway address - Configures Ethernet gateway address.
Page 21
900035_B
900035_B - Touchscreen user interface
