Game ready ATX TRAUMATIC AMPUTEE, Use Manual

Page: 2 / 76

1
Ensure that the Wrap has been applied
uniformly against the body with a close and
snug fit.
2
Attach the Wrap to the Control Unit with the
Connector Hose. There should be an audible
“click”. To disconnect, simply press the blue or gray
button and remove the connector from the Wrap.
WRAP APPLICATION
ABOVE KNEE
BELOW KNEE (LEFT, RIGHT)
BEFORE INITIAL USE
Prime the Wrap using the following steps:
• With the GRPro 2.1 Control Unit
off, attach the Connector Hose to the
Control Unit and the Wrap
• Lay the Wrap open and flat next to
the Control Unit (not on the body)
• Turn the System on and run for 2
minutes with No Pressure