background image

 

Galvanic Applied Sciences USA, Inc. 

41 Wellman St. 

Lowell, MA. 01851

 

Tel: 978-848-2701 

Fax: 978-848-2713 

Email: info@galvanic.com

 

 

 

 

48 

• 

Loss, damage, or defects resulting from transportation to Buyer’s facility, improper or 

inadequate maintenance by Buyer, software or interfaces supplied by Buyer, operation 

outside the environmental specifications for the instrument, use by unauthorized or 

untrained personnel or improper site maintenance or preparation.  

• 

Products that have been altered or repaired by individuals other than Seller personnel or 

its duly authorized representatives, unless the alteration or repair has been performed 

by an authorized factory trained service technician in accordance with written 

procedures supplied by Seller.  

• 

Products that have been subject to misuse, neglect, accident, or improper installation.  

• 

The sole and exclusive warranty applicable to software and firmware products provided 

by Seller for use with a processor internal or external to the Product will be as follows: 

Seller warrants that such software and firmware will conform to Seller’s program 

manuals or other publicly available documentation made available by Seller current at 

the time of shipment to Buyer when properly installed on that processor, provided 

however that Seller does not warrant the operation of the processor or software or 

firmware will be uninterrupted or error-free.  

 

The warranty herein applies only to Products within the agreed country of original end 

destination.  Products transferred outside the country of original end destination, either by the 

Seller at the direction of the Buyer or by Buyer’s actions subsequent to delivery, may be subject 

to additional charges prior to warranty repair or replacement of such Products based on the 

actual location of such Products and Seller’s warranty and/or service surcharges for such 

location(s).  

 

Repaired Products 

 

Repaired products are warranted for 90 days with the above exceptions.   

 

Limitation of Remedy and Liability

 

IN NO EVENT SHALL SELLER BE LIABLE TO BUYER FOR ANY INDIRECT, 

CONSEQUENTIAL, INCIDENTAL, SPECIAL OR PUNITIVE DAMAGES, OR FOR ANY 

LOSS OF USE OR PRODUCTION, OR ANY LOSS OF DATA, PROFITS OR REVENUES, 

OR ANY CLAIMS RAISED BY CUSTOMERS OF BUYER OR ANY ENVIRONMENTAL 

DAMAGE OR ANY FINES IMPOSED ON BUYER BY ANY GOVERNMENTAL OR 

REGULATORY AUTHORITIES, WHETHER SUCH DAMAGES ARE DIRECT OR 

INDIRECT, AND REGARDLESS OF THE FORM OF ACTION (WHETHER FOR BREACH 

OF CONTRACT OR WARRANTY OR IN TORT OR STRICT LIABILITY) AND 

WHETHER ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR NOT. 

 

Summary of Contents for MoniTurb-F

















































Reviews: