Gallet GALMIX 415, Instruction Manual

Page: 28 / 48

28 / 41
• Never use the appliance for any other purpose than for that described in these instructions for
use!
• wARNING : There is a risk of injury in case of incorrect use (not in accordance with the
manual) of the appliance
• The producer does not undertake any responsibility for damage caused by improper use of
the appliance and the accessories (e.g.
food deterioration, injury by knife edge, fire, etc.
)
and its guarantee does not cover the appliance in the case of failure to comply with the safety
warning above.
ESCRIPTION Of THE CONTROLS
Accessories P7, P8, P9, P10, P11, P12, P13 only for type GALMIX 435.
P6
P4
P2
P3
P1
P5
P7
P11
P8
P10
P9
P12
P5
P13
INSTRUCTION fOR USE
Remove all the packing material and take out the drive unit and the accessories. Remove all
possible adhesion foils, stick–on labels or paper from the appliance. Before the first use, wash
the parts that will be in contact with food in hot water with a detergent, rinse them thoroughly with
clean water and wipe till dry, or let them dry.
Safety switch ( P2, P3 )
Button
1
– low speed Button
2
– maximum speed
By pushing and holding the button you will start the appliance and by releasing the button you will
switch off the appliance.
Speed regulator
(
P4
), (
only for type GALMIX 435
)
By turning the regulator from 1 to 5 you can continuously change the speed of the motor revolutions.
ACCESSORy INSTALLATION
Slide the immersion mixer P6 onto the drive unit P1 and secure it by slight pushing till the blocking
snaps in. For removing the mixer, push the blocking button P5 and remove the adapter.
P1 Motor unit
P2 Switch 1 - speed 1
P3 Switch 2 - maximum speed
P4 Speed regulator
P5 Adapters blocking buttons
P6 Blender stick
P7 Measuring bowl
P8 Blade gear box adapter
P9 Blade
P10 Chopper bowl
P11 Whisk
P12 Whisk gear box adapter
P13 Container lid