Gallet GALMIX 329, Instruction Manual

Page: 38 / 56

38 / 51
Put knife
E2
or
F8
into the respective container
E
or
F
(Fig. 6). Put food into the container. Put
respective lid E3 or F3 onto the container and secure it (Fig. 4, 5). Connect the drive unit to the
lid (Fig. 3). Hold the drive unit and the container firmly. Start the drive unit by pushing switch A1 .
Food will be processed in about 10 seconds to 2 minute. After finishing work, remove the knife in
the opposite direction.
CAUTION: The maximum time of processing is 2 minutes . Then wait for 10 to 15 minutes ,
which is necessary for the drive unit to cool down.
Recommendation
– Before processing, cut bigger pieces of food into cubes of about 2 x 2 x 2 cm / 3 x 3 x 3 cm .
– Never crush very hard ingredients with the sickle–shaped knife, such as coffee beans,
nutmeg, ice cubes, and grains etc. ! The knife would be blunt soon.
– Hard ingredients (e.g. legumes, soya beans, etc. ) should be soaked in water before processing.
– The longer you process the food, the smoother the result will be.
– If you chop hard cheese or chocolate, work for a short time. It is because the ingredients are
heated excessively by chopping, they become softer and they can become lumpy.
– We recommend using the pulse mode for processing. One pulse is max. 2 seconds.
PROCESSING GUIDE
Small chopping container (E) 500 ml
Food Maximum amount Approximate time
[seconds]
Speed
Meat/fish 250 g 10 - 60 min - max
Herbs 50 g 10 max
Nuts 200 g 30 max
Cheese 100 - 200 g 60 max
Hardboiled eggs 3 pieces 5 min
Onions 150 g 5 min - max
multi-purpose container (F) 1500 ml
Food Maximum amount Approximate time
[seconds]
Speed
Meat/fish 400 g 10 - 60 min - max
Herbs 125 g 20 max
Nuts 300 g 60 max
Cheese 100 - 300 g 60 max
Hardboiled eggs 6 pieces 5 - 10 min
Onions 400 g 5 - 10 min - max
Multi-purpose container 1500 (F)
Be careful, grater blades F10, F11, F12, F13 are very sharp!
Graters are intended for cutting,
chopping, slicing of all kinds of tough food (e.g. fruit, vegetables, mushrooms). Insert the selected
grater into holder F9 and secure it by slight pushing (you will hear a snapping sound). Then insert
the holder into container F (Fig. 6). Insert lid H3 on the container and secure it (Fig. 5). Connect
the drive unit to the lid (Fig.3). Hold the drive unit and the container firmly. Start the drive unit by
pushing switch
A1
. Food will be processed in about 10 seconds to 2 minute. After finishing work,
remove the grater in the opposite direction.