EN - 72
EN
IX. CONTROL
This microwave uses advanced electronic controls to adjust the cooking parameters
to better suit your cooking needs. Open it by pulling the handle.
Notes
•
If the MV oven is not working properly, disconnect it from the electricity supply. outlet,
wait 10 seconds and then plug it in again.
•
When the door is opened or the appliance is running, the interior will be illuminated.
•
The door can be opened during the preparation process (e.g. during defrosting),
the timer will stop and the operation of the appliance will be interrupted. Press
C2
to
continue.
•
When the food is finished heating, the LED display will show End and three beeps will
sound to prompt you to remove the food. If you do not press the
C3
button or open
the door, the sound signal will sound at an interval of 3 minutes.
•
The turntable can rotate in any direction.
•
When the door is opened in standby mode or during the setup process, the initial
information on the display will remain the same. It can also be changed and adjusted.
However, the
C2
button will not work.
•
When the function is active, pressing the
C3
button interrupts the program.
A second press cancels the program.
1. Clock setting
After connecting the oven to the mains, "1:00" will appear on the display (flashing ":")
and an acoustic signal will sound. Then the appliance goes into standby mode.
•
In standby mode, press the
C4
button for 3 seconds. The hour digits will start flashing.
•
Turn
C6
to set the current hour.
•
Confirm by pressing
C4
- the minute digits start flashing.
•
Turn
C6
to set the minutes in the range 0-59.
•
Press
C4
to finish.
Notes
•
If you press the
C3
button while setting the hours, the oven will automatically return
to the previous state.
•
To change the clock settings, repeat the procedure in the same way.
2. Quick cooking
(MW)
With the oven at rest, press the
C2
button to start cooking food at full microwave power for
60
seconds. Each further press of the
C2
button increases the cooking time by 10
seconds.
3. Express cooking
Quick
(MW)
For more comfortable and fast heating - press the
C8
button to quickly set the time
0:30 > 1:00 > 1:30. Press the
C2
button to confirm the setting and start heating.