GalileoSky Lite Series, User Manual

Page: 59 / 77

User Manual Galileosky Lite Trackers
59
Command format
SleepMode OffOnStop,DST,GNSS,GPRS,ADC, WakeUp,ST
Parameters
OffOnStop – 0 – do not turn off GPS\GLONASS unit at a stop;
1 – turn off GPS\GLONASS unit at a stop.
DST – Time spent at a stop, after which the tracker will switch to the deep sleep mode;
GNSS – turn off GPS\GLONASS unit in the deep sleep mode;
GPRS –turn off GSM/3G-unit in the deep sleep mode;
ADC – reduce ADC sampling rate in the deep sleep mode; the maximum frequency that can
be measured at inputs is reduced by 2 and the minimum impulse period that can be registered
increases twofold;
WakeUp – a period in seconds between connections to a server in deep sleep mode;
ST – a length of connection to a server in deep sleep mode.
Explanation
Power saving mode control. In the deep sleep mode no 1Wire sensors sampling and no
battery charging are performed.
Example
Request: SLEEPMODE 1,60,1,1,1,1,1,1,1,3600,600
Reply:SLEEPMODE:OffGNSSOnStop=1,DSTimeout=60, GNSS=1,GPRS=1,ADC=1,
GSMWakeUp=3600, SessionLen=60;
Command format
RemoteConfig OnOff
Parameters
OnOff – turning on the remote configuration function:
0 – remote configuration is off;
1 – remote configuration is on.
Explanation
Turns on and off the remote configuration (section Remote configuration ).
Example
Request: RemoteConfig 1
Reply: REMOTECONFIG:1;