User Manual Galileosky Lite Trackers
58
Command format
SleepMode OnOff
Parameters
OnOff – 0 – to switch off power saving mode;
1 – to switch on power saving mode.
Explanation
Power saving mode supposes switching off GPS or GLONASS-unit during vehicle`s stop.
The unit will be switched on again as soon as the vehicle starts moving.
Example
Request: SLEEPMODE 1
Reply: SLEEPMODE:1;
Command format
FLASHARCHIVE Dynamic,SendOrder
Parameters
Dynamic – whether the dynamic archive structure is used or not:
0 – the dynamic archive structure is off, all possible data are saved in archive;
1 – the dynamic archive structure is on, only the data selected to be transmitted to the server
are saved in archive.
SendOrder – order of data transmission from archive to server:
0 – the data are sent deep into the archives; the most current data are sent first, then the oldest
ones.
1 – the data are sent in chronological order
Explanation
Archive structure setting and the setting of the data transmission order to the server
Example
Request: FLASHARCHIVE 1,1
Reply: FLASHARCHIVE: Dynamic=1,StraightSendOrder=1;