GALILEOSKY GLONASS/GPS Satellite v4.0 (0223) User’s manual
GalileoSky Ltd.
Page 7
1
Package
The standard package includes the GALILEOSKY terminal (hereinafter referred to as the Terminal) and a pin
connector with contacts. Everything extra should be bought separately.
1.
GSM aerial connector
2.
GLONASS aerial connector
3.
Iridium aerial connector
4.
microSD
5.
USB slot
6.
SIM 0
7.
SIM 1
The Terminal has 4 LED indicators which show its current status: red (external power supply), yellow
(microcontroller), green (GPS or GLONASS receiver), and blue (GSM modem).
See
section
LED indicators.
You will also need:
1.
USB-cable
1
2.
GLONASS aerial
1
3.
GSM aerial
1
4.
Iridium aerial
1
5.
Power supply unit
9V-39V (15W)1
2
Technical specifications
Parameter
Description
Analog-discrete and pulse
frequency inputs
6 pcs;
Voltage range
–
0-33 V;
Maximum measured frequency
–
3,5 kHz;
Input resistance of every input is 14 kOhm to the ground.
Transistor outputs (output 0/1)
4pcs;
Maximum voltage
–
30 V;
Maximum current 80mA.
Battery type
Li-Ion battery; 600mAh;
Average power consumption
1,6 W
ADC resolution in bits
10
Archive capacity
up to 58000 points by having 2 MB flash memory;
up to 450000 points by having16 MB flash memory;
up to 2500000 points for each GB by using micro SD card
1-Wire
yes
CANBUS
J1939, FMS, J1979, OBD II, 29- bit and 11-bit identifiers
RS485
1
USB 2.0
Terminal setting, troubleshooting, reflashing
microSD
support of cards of up to 32GB
5
1 3
2
6 4
7
