GALILEOSKY GLONASS/GPS Satellite v4.0 (0223) User’s manual
GalileoSky Ltd.
Page 38
SAT. Fix = 1
Current position is fixed (0 – not fixed);
SAT. SatInUse = 7
7 satellites are used for navigation;
SAT. Valid = 1
Coordinates are right (they can be used for
location determination). This
Valid
is not
related to
valid
in packet and status.
Galileo uses GLONASS
Terminal uses GLONASS system.
Galileo uses GPS
Terminal uses GPS system.
SAT. Incorrect data from
GLNS/GPS module
Wrong data are received from the used unit
(probably because of processor overload)
SAT. Time out. Restart MCU
Terminal gets no data from receivers
(GLNS/GPS)
SAT. High Speed = 200
Navigation speed data filter turned on (this data
will be skipped by the unit).
SAT. HDOP is high = 6
Navigation HDOP data filter turned on (this data
will be skipped by the unit).
SAT. Jump = 5000
Navigation coordinate data filter turned on
(leap to large distance occurred).
SAT. First start OK. Sat count
>= MIN
By the Terminal turning on the unit must get
more MIN satellites (only in this case, the data
are reliable).
Other troubleshooting messages are not described, but they have intuitive names. If there are any
questions, you will find the answer at our forum.
