GALILEOSKY GLONASS/GPS Satellite v4.0 (0223) User’s manual
GalileoSky Ltd.
Page 41
Example of saving and downloading parameter set
For quick configuration of several Terminals with the same set of commands it is recommended to run the
commands from a pre-saved file. To do this, enter a list of commands in the Command window. Make sure
that they are typed correctly by pressing the Run commands button and then press Save to file.
In the opened window,
you will be offered to
save the file in log
configurator folder.
Type the file name and
press Save button as
shown in the right-hand
figure
The file will be saved in log configurator folder. Then press
Open from file…
button.
Select the necessary file
and press Open button,
as shown in the right-
hand figure.
To run several commands at the same time press
Run commands
button.
To run only one command it is necessary to go to it in Commands window and press
Run single command
button.
